tubbadu 3d ago • 100%
Total ignorant question: how hard would it be to fork (and mostly maintain) chromium keeping manifest V2 support?
tubbadu 3d ago • 100%
What's the point of keeping part of the UI closed source?
tubbadu 2w ago • 100%
I'll try other kernels then, but I don't know how to check if the system is actually powered off or not without waiting 8 hours and checking the battery drain XD perhaps the halt could be the key
thanks!! I'll update the thread if I'll discover something new
tubbadu 2w ago • 100%
update: I tried but when off (or at least "apparently off") the USB ports are off, my phone does not charge when plugged in
tubbadu 2w ago • 100%
okay, I think we have some news: if I kill the pc by holding the power button, after a night the battery loses 0%! so I guess the problem is that it's not shutting down properly. I tried to sudo halt --poweroff and it drained the battery as usual. I then tried sudo halt -f and something strange happened: the screen immediately turned off, but the red LED on the volume key indicating that the volume is muted stayed on, so the pc wasn't completely off. what could be the problem? and why does this happen only when I force the halt? could it be a kernel issue?
thanks for the help and for your time!!!
tubbadu 3w ago • 100%
I'm going to free space for dinner
tubbadu 3w ago • 100%
I checked and yes, there's no cmos battery in it. Do you think this may have something to do with it?
tubbadu 3w ago • 100%
I'll try it as soon as I can, thanks for the suggestion! I don't think the battery is dying, because while powered on the battery life is very good
tubbadu 3w ago • 100%
As it should be, the battery life while in use it's even better than my own pc
tubbadu 3w ago • 100%
Probably there are problems with the report to the OS because the battery health is marked as 100%, which is a bit strange for a 4yo pc. Do you think this may have something to do with the battery drain?
tubbadu 3w ago • 100%
The battery health is marked as 100%, which seems strange to me. However, the battery life while powered on is very good, so I don't think the battery is old or exhausted. Do you think that changing the battery may be the solution?
tubbadu 3w ago • 100%
I'll have to check it out then, thanks for your help!
Hello! My girlfriend's HP laptop running kubuntu 24.04 has this problem: when it's turned off (either from the GUI or `poweroff`) it discharges overnight, from 100% to 0% in a few days. I searched the web to look for fixes: - wake on lan is disabled in the BIOS - USB ports have no settings in the bios, but there's nothing connected to them anyway - the system is actually powered off, not sleeping (at least if `poweroff` actually works) - everything, firmware included, is up to date She doesn't remember having this problem from the beginning, but cannot tell when this started occurring Did any of you ever encounter this problem? I don't know what else to do, and it's quite annoying. Thank you for your time!
tubbadu 1mo ago • 100%
Android 14 here, no improvements at all
tubbadu 1mo ago • 100%
Why isn't this aligned?
tubbadu 3mo ago • 100%
Check out Marktext
Hello! I have jellyfin+qbittorrent+radarr on my home server, but I can't make it work with hardlinks. When a download finishes, it just copies it to the /movie folder, doubling the disk space. at least, I think that it's just a copy, because the disk space is double and `find ./downloads -samefile ./movies/path/to/file.mkv` returns no result, meaning if I understand correctly that file.mkv is not hardlinked to any file in the download folder (but it should). this is the docker compose: ```yml radarr: image: lscr.io/linuxserver/radarr:latest container_name: radarr network_mode: container:gluetun environment: - PUID=1000 - PGID=1000 - TZ=Europe/Rome volumes: - ./radarr-config:/config - /media/HDD1/movies:/movies - /media/HDD1/downloads:/downloads restart: unless-stopped ``` HDD1 hard drive is formatted ext4, that supports hardlinks (in fact I can create them manually), and in the radarr settings the checkbox "use hardlinks instead of copy" is checked. Ideally I'd prefer softlinks instead of hadlinks, but I don't think there's a way to do it natively, I think I'd need an external script Any tips? Thanks in advance!
Hello! I was wondering if running periodically a script to automatically pull new images for all my containers is a good or a bad idea. I'd run it everyday at 5.00AM to avoid interruptions. Any tips? EDIT: Thanks to everyone for the help! I'll install Watchtower to manage the updates
Hello! My disk space was out of space left, so I decided to remove some snapper snapshot. `snapper list` listed over 360 snapshots. I removed them, and freed 50Gb of space. One of these hasn't been deleted successfully: ``` Cannot delete snapshot 166 since it is the next to be mounted snapshot. ``` it's description is `writable copy of #156`. How can I remove it? should I do it using `btrfs subvolume delete`? here's the output of `sudo btrfs subvolume list -t /`: ``` ID gen top level path -- --- --------- ---- 256 178487 5 timeshift-btrfs/snapshots/2023-09-18_18-25-33/@ 257 341688 5 @home 258 341680 5 @cache 259 341688 5 @log 260 26 256 timeshift-btrfs/snapshots/2023-09-18_18-25-33/@/var/lib/portables 261 27 256 timeshift-btrfs/snapshots/2023-09-18_18-25-33/@/var/lib/machines 708 341688 5 @ 710 341680 708 .snapshots 2781 178991 5 timeshift-btrfs/snapshots/2024-05-07_12-20-43/@ 2968 326034 710 .snapshots/166/snapshot 2969 341679 710 .snapshots/167/snapshot ``` all those timeshift subvolumes are there because before snapper, I used to use timeshift. I tried to remove them: ``` sudo btrfs subvolume delete timeshift-btrfs/snapshots/2023-09-18_18-25-33/@/var/lib/machines ERROR: Could not statfs: No such file or directory ``` If I understand correctly, it means that I should give an actual "system" path instead of the path in the table, but I don't understand which path thanks in advance to everyone!
Hello! I have a problem: sometimes I instinctively refer to a movie by the English name (for example, Star Wars), but if I search for it in jellyfin it is not found, as the italian translated name is "Guerre Stellari". I'd like to be able to search for it with both the original name and the translated name. The original name is present in the metadata, it just isn't used as a search parameter. Is there a way? ------- EDIT: I understood the problem: i'm stupid Star wars episode IV had both the translated and the original title, and was correctly find when searching "star wars", but episode V and VI didn't have the string "star wars" in the original title! and this is why jellyfin didn't find them. I edited the metadata and added it, now it works perfectly. Thanks to everyone!
Hello guys! sometimes I watch movies with friends over jitsi meet, and in order to share just a single window with just its own audio I use chromium, that has the "share tab" option. However, I'd like a more general solution (I cannot play mkv files on browser, for example). I'd like a compact way that creates a virtual device sharing the window (even if the window gets minimized or hidden behind other windows!) and its audio, without the audio of all other windows (I don't want my notification sounds to be shared too). a quick online search gave me only "complex" answers, that I'll try only if a more convenient way is not available. [I'm running EndeavourOS KDE Wayland] Thank to everyone in advance!
Hello fellow selfhosters! I have a laptop and a tablet (both running endeavourOS), and I want a certain folder to be always in sync. I also have a very potato server. My two options currently are Nextcloud and Syncthing. The laptop and the tablet are rarely online at the same time, so I need the server as middleman (so, no syncthing laptop <-> tablet, but laptop <-> server <-> tablet). Which one do you recommend? The power consumption (of the client) is also very important, because both the laptop and the tablet are battery-powered I'm also open to other options as well! thanks in advance to everyone! --------- Edit: thanks to everyone for your precious help! I finally set up syncthing and it's working flawlessly!
Hello! In [qalc](http://qalculate.github.io/) I can do calculations using measuring units like this: ``` > 5 W * 3 s (5 watts) × (3 seconds) = 15 J ``` I'd like to be able to do something similar also in GNU Octave. I think the [symbolic](https://octave.sourceforge.io/symbolic/) library could be a place to look at, but I found nothing "already done". Do any of you know of a way to achieve this functionality?
Hello! I'll try to explain what I'm looking for: I sometimes have to write simple web pages (not just text, also buttons and video players and so on), but I really *really* hate writing html code. What I'm used to is QML, which I like a lot, because of the ease of placing objects exactly where I need using the anchors and the Layout objects. What I'm looking for is a language or something with a similar syntax, that can then be "built" to plain HTML/CSS/JS. Is there something like this? I know I can compile Qt/QML for webassembly, but I'm having huge amounts of problems, and also I'd like to have the possibility to have a plain HTML result, not necessary bind to the server side. thanks in advance!!
Hello! I'd like to follow some niche meme pages on instagram with my RSS reader app (feeder), and found out about [RSSHub](https://docs.rsshub.app/) that seems exactly what I need. However, I tried using some of the public instances and except for the first time after requesting an RSS feed, it got rate limited and completely blocked. Does self hosting it solve the problem? Is any of you using it reliably?
Hello! Today I learned about the existence of LibreY, and the project seems very interesting. I was wondering, how does it compare with SearXNG? which one is easier to self host, and which one is lighter on resource usage? Which one gets rate-limited less? I'm particolary interested in opinions of people who used both Thanks in advance!
Hello fellow pirates! I'm tired of having all the telegram premium ads and antifeatures in the client and I'm looking for a client that removed them even if it's against the TOS. Any tips? I'd rather use an actual open source fork than a cracked version of the original I'm looking for both Android and Desktop (Linux) What I want is to remove the hateful ads in the channels and the "buy premium to unlock these emojis", and also to be able to arrange the folders in whatever order I like, without being forced to keep the "All messages" as first thanks in advance!
Hello! I just came across [Presearch](https://www.presearch.io/), and it looks very interesting to me. If I understand correctly, at the moment it's just another metasearch engine, but they say they're planning to add their own index. How would a distributed search engine index work? Opinions on this?
Hello! I know this is probably not piracy, but I think that this community is the best one to ask this. I'd like to stream live TV on my jellyfin server, and in the future perhaps try to implement a way to silence the audio during ads, but I want to start a step at a time: Before going in jellyfin, let's try with VLC that is easier. The live stream I'm trying to stream is taken from [raiplay](https://www.raiplay.it/dirette/rai1), the official website of RAI, the main italian tv station. I ignorantly just downloaded all the 4 .m3u8 files with [this extension](https://addons.mozilla.org/en-US/firefox/addon/extract-video-link/) and, one at a time, I tried to open them with VLC, but all I obtained was VLC loading forever. What's going on? did I missed something important? [if you know of better ways to do this, any recommendation is welcome!] thanks in advance!
Hello everybody! I just learned that I can get a free .eu.org domain, but I'm not sure I understand the domain creation process. Any of you has one? I'm unsure what should I write in the "name server" section: 
Hello! I'm trying to sign up to [itatorrent.xyz](https://itatorrents.xyz/register/null) but after typing username, mail and password, I get a "capcha error". Do any of you managed to sign up?
Hello! I'm still not satisfied with my note taking app. I tried dozen of them, read tons of lists on random blogs on the internet, without any success. I'll try to ask you then. I'm looking for a note taking app with just this 3 features: - richtext/WYSIWYG (i don't want to write plain text and then press a button to see it rendered) - it has to support CHECKBOXES! Most of the apps I tried does not support them, or supported them only if all the note was a checklist. I don't want a checklist, I want a note where I can put some checkbox inside! - FOSS and active The one I'm currently using is obsidian, but it's not FOSS and it feels very overcomplicated for a simple note apps. Any suggestion is welcome! EDIT: forgot to mention, I'm talking about Android XD
Hello fellow selfhosters! I reformatted my USB hard drive from exFAT to XFS because I needed a filesystem that could handle hardlinks. I remounted the hard drive and now jellyfin webUI has a severe stuttering problem on some videos, all of them are MKV but it may be a coincidence. On android (using exoplayer) the same files works smoothly. what could be the problem? in the logs I get a bunch of `Slow HTTP Response from http://fedoraserver:8096/ to 192.168.1.30 in 0:00:07.4635856 with Status Code 200` OT: while looking at the logs [this happened](https://lemmy.kde.social/post/742745) SOLUTION: I enabled hardware acceleration, and manually selected also the `HEVC` and `Allow encoding in HEVC format` settings, and now the stutter disappeared! thanks to everyone for your help!!!
I have no idea what's going on. my server once run fedora, and its hostname was fedoraserver. I recently installed AlmaLinux, and now its hostname is tserver. today I was looking at the logs of jellyfin and... `Slow HTTP Response from http://fedoraserver:8096` ... ... ... \* realization * ... WTF!!!!! It's like I saw a ghost. do any of you know what's going on? even more strange: ``` $ host fedoraserver fedoraserver.station has address 192.168.1.4 fedoraserver.station has address 192.168.1.13 fedoraserver.station has address 192.168.1.41 fedoraserver.station has address 192.168.1.10 $ host tserver tserver.station has address 192.168.1.13 $ host 192.168.1.13 13.1.168.192.in-addr.arpa domain name pointer fedoraserver.station. ``` I'm... I'm scared